3dcc.zip        42124 10-18-97 3D Control Center is a small application which
                               | allows you to easily use multiple Direct3D
                               | accelerator cards in one system at the same
                               | time.
3dfix.zip        7320 10-15-97 VooDoo Graphics DOS prompt fix, This is a
                               | work-around to prevent 3dfx cards enabling
                               | themselves in all full screen DOS sessions
                               | after abnormal termination of a DOS based 3dfx
                               | application.
s3fix.exe      281281 10-15-97 S3 video card fix, Fix for users that have a S3
                               | 968/868 based 2D video card and experience
                               | system lock ups or erratic behavior after
                               | installing DirectX.
suprgrab.zip    44051 10-15-97 Super Grab will grab the current contents of
                               | the frame buffer (backbuffer) on a 3Dfx card
                               | and do proper filtering and gamma correction
                               | on it.
tuner.zip      105985 10-15-97 Righteous 3d Tuner, This is a small program
                               | that allows you to change some nice things on
                               | the Righteous 3d Board like turn off the
                               | irritating logo, or change the brightness.
tweek.zip      112596 10-15-97 Tweek allows you to enable and disable some of
                               | the hidden facilities within the 3dfx chipset.
                               | Tweek has been tested and is used by us at
                               | http://www.3dfxmania.com.
tweekrush.zip  155424 10-15-97 TweekRush (VooDoo Rush Cards) Designed for
                               | tweaking Hercules Stingray, MAY work on
                               | others.. Use at your own risk.
wizard.zip     242550 10-15-97 Tune Up Wizard, This program allows you to run
                               | a pre config ured batch file before running a
                               | program. Nice to have when changing variables
                               | between programs.